We offer a seal repair kit for the top hydraulic cylinder A1298001672 / 1298001672 / 129 800 1672 used in Mercedes SL R129 (front lock cylinder) / E-Class A124 W124 (rear bow lock cylinder) / CLK A208 W208 (rear bow lock cylinder) models.  The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A hydraulic cylinder contains a rod seal, an o-ring (depending on the model, not always installed) and a one- or two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seal (and the o-ring). If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: Although the seals we offer have a high temperature range, they may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a seal repair kit for the Mercedes top hydraulic cylinder A1298001672 / 1298001672 / 129 800 1672 used in Mercedes SL R129 (front lock cylinder) / E-Class A124 W124 (rear bow lock cylinder) / CLK A208 W208 (rear bow lock cylinder) models.  The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A hydraulic cylinder contains a rod seal, an o-ring (depending on the model, not always installed) and a one- or two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seal (and the o-ring). If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: Although the seals we offer have a high temperature range, they may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a seal repair kit for the top hydraulic cylinder A1298000072 / 1298000072 / 129 800 0072 used in Mercedes SL R129 (tonneau cover lock cylinder, rear lock cylinder) / E-Class A124 W124 (tonneau cover lock cylinder) / CLK A208 W208 (case cover lock cylinder) models.  The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A hydraulic cylinder contains a rod seal, an o-ring (depending on the model, not always installed) and a one- or two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seal (and the o-ring). If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: Although the seals we offer have a high temperature range, they may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a seal repair kit for the top hydraulic cylinder A1298000072 / 1298000072 / 129 800 0072 used in Mercedes SL R129 (tonneau cover lock cylinder, rear lock cylinder) / E-Class A124 W124 (tonneau cover lock cylinder) / CLK A208 W208 (case cover lock cylinder) models.  The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A hydraulic cylinder contains a rod seal, an o-ring (depending on the model, not always installed) and a one- or two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seal (and the o-ring). If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: The provided seals may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a seal repair kit (piston seal) for the top hydraulic cylinder A1298001672 / 1298001672 / 129 800 1672 used in Mercedes models SL R129 (front lock cylinder) / E-Class A124 W124 (rear bow lock cylinder) / CLK A208 W208 (rear bow lock cylinder).  The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A hydraulic cylinder contains a rod seal, an o-ring (depending on the model, not always installed) and a one- or two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seal (and the o-ring). If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: The provided seals may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a seal repair kit (piston seal) for the top hydraulic cylinder A1298001672 / 1298001672 / 129 800 1672 used in Mercedes models SL R129 (front lock cylinder) / E-Class A124 W124 (rear bow lock cylinder) / CLK A208 W208 (rear bow lock cylinder).  The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A hydraulic cylinder contains a rod seal, an o-ring (depending on the model, not always installed) and a one- or two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seal (and the o-ring). If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: The provided seals may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a seal repair kit (piston seal) for the top hydraulic cylinder A1298000072 / 1298000072 / 129 800 0072 used in Mercedes models SL R129 (tonneau cover lock cylinder, rear lock cylinder) / E-Class A124 W124 (tonneau cover lock cylinder) / CLK A208 W208 (case cover lock cylinder).  The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A hydraulic cylinder contains a rod seal, an o-ring (depending on the model, not always installed) and a one- or two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seal (and the o-ring). If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: The provided seals may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a seal repair kit (piston seal) for the top hydraulic cylinder A1298000072 / 1298000072 / 129 800 0072 used in Mercedes models SL R129 (tonneau cover lock cylinder, rear lock cylinder) / E-Class A124 W124 (tonneau cover lock cylinder) / CLK A208 W208 (case cover lock cylinder).  The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A hydraulic cylinder contains a rod seal, an o-ring (depending on the model, not always installed) and a one- or two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seal (and the o-ring). If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: The provided seals may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a seal repair kit for the top hydraulic cylinder A2088000072 / 2088000072 / 208 800 0072 (top drive cylinder) used in Mercedes CLK A208 W208 models.  The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A Mercedes CLK A208 W208 hydraulic cylinder contains two rod seals (consisting of two o-rings and two flat seals) and a two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seals. If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: The provided seals may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a seal repair kit for the top hydraulic cylinder A2088000172 / 2088000172 / 208 800 0172 (bow extension cylinder) used in Mercedes CLK A208 W208 models.  The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A Mercedes CLK A208 W208 hydraulic cylinder contains two rod seals (consisting of two o-rings and two flat seals) and a two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seals. If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: The provided seals may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a seal repair kit for the top hydraulic cylinder A2088000172 / 2088000172 / 208 800 0172 (case cover lift cylinder) used in Mercedes CLK A208 W208 models.  The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A Mercedes CLK A208 W208 hydraulic cylinder contains two rod seals (consisting of two o-rings and two flat seals) and a two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seals. If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: The provided seals may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a complete seal repair kit for the top hydraulic cylinders used in Mercedes CLK A208 W208 models.  This seal kit contains parts to replace the rod seals of the following hydraulic cylinders: 2 x A 208 800 0072 (top drive cylinder)2 x A 208 800 0172 (bow cylinder)1 x A 208 800 0272 (case cover lift cylinder)1 x A 129 800 1672 (rear bow lock cylinder)1 x A 129 800 0072 (case cover lock cylinder) The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A hydraulic cylinder contains a rod seal, an o-ring (depending on the model, not always installed) and a one- or two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seal (and the o-ring). If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: The provided seals may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a complete seal repair kit for the top hydraulic cylinders used in Mercedes CLK A208 W208 models.  This seal kit contains parts to replace the rod seals of the following hydraulic cylinders: 2 x A 208 800 0072 (top drive cylinder)2 x A 208 800 0172 (bow cylinder)1 x A 208 800 0272 (case cover lift cylinder)1 x A 129 800 1672 (rear bow lock cylinder)1 x A 129 800 0072 (case cover lock cylinder) The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A hydraulic cylinder contains a rod seal, an o-ring (depending on the model, not always installed) and a one- or two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seal (and the o-ring). If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: The provided seals may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a complete hydraulic line port seal repair kit at the pump side used in Mercedes CLK A208 W208 models. These seals are located at the end of the hydraulic lines that have to be connected to the hydraulic pump. One seal is needed per hydraulic line.Attention: The provided seals may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a seal repair kit for the hydraulic block A1248001678 used in Mercedes CLK A208 W208 models.  The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A hydraulic cylinder contains a rod seal, an o-ring (depending on the model, not always installed) and a one- or two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seal (and the o-ring). If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: The provided seals may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32

We offer a seal repair kit for the hydraulic pump A2088001048 / A2088001748 used in Mercedes CLK A208 W208 models.  The issue: A lot of Mercedes convertible owners are aware of the well known problem: After a while the hydraulic cylinders responsible for opening and closing the soft top start leaking and do not work properly anymore. The leak occurs when the installed o-rings, rod seals and piston seals wear out to a point that they are not able to withstand the pressure inside the hydraulic cylinder anymore. This is especially noticeable during the summer in warmer regions since the original materials are limited in terms of temperature resistance. What others offer: Most competitors source cheap Polyurethane rod seals (usually green or blue) from China, most of which are of lower quality than the original rod seals which were already limited in terms of service life and heat resistance. Our solution: We wanted more than just a simple and cheap replacement but a solution that incorporated unparalleled longevity and durability. Therefore we developed two kinds of rod seals made from high-tech materials: High-Performance Polyurethane (HPU, red color) as well as heat and wear resistant Viton® (FPM/FKM, brown color). HPU combines excellent mechanical properties with high chemical resistance, exceeding those of standard Polyurethane. Additionally, Viton® has a far greater temperature resistance (from -20°C/-4°F to +204°C/+400°F) and is therefore the preferred material for vehicles in warmer regions. The rod seals and piston seals are CNC-milled to our specifications within tolerance class DIN ISO 2768-1-f (fine) in Germany to ensure a high level of accuracy. Seal types: A hydraulic cylinder contains a rod seal, an o-ring (depending on the model, not always installed) and a one- or two-piece piston seal. If the hydraulic cylinder is leaking, you'll need to replace the rod seal (and the o-ring). If the hydraulic cylinder is not able to open and close the soft top properly anymore, you'll need to replace the piston seal. Attention: The provided seals may only be used with the following types of hydraulic fluid to ensure smooth operation and a long service life:- Genuine Mercedes Benz hydraulic fluid MB 343.0, hydraulic fluids in accordance with standard DIN 51 524, HLP 32 or standard ISO 11158, HM 32